My Part-J
Parameters
# | Parameter name | Value | Unit | Default | Min | Max | Step |
1 | main | ||||||
1.1 | mm | 300 | 10 | 400 | 1 | ||
1.2 | mm | 300 | 10 | 400 | 1 | ||
1.3 | mm | 300 | 10 | 400 | 1 | ||
1.4 | mm | 10 | 0 | 50 | 1 | ||
1.5 | mm | 10 | 0 | 50 | 1 | ||
1.6 | mm | 10 | 0 | 50 | 1 | ||
1.7 | mm | 10 | 0 | 50 | 1 | ||
1.8 | dropdown | 0 | 0 | 3 | 1 | ||
1.9 | mm | 10 | 0 | 50 | 1 | ||
1.10 | mm | 100 | 10 | 400 | 1 | ||
1.11 | mm | 200 | 10 | 400 | 1 | ||
1.12 | mm | 10 | 0 | 50 | 1 | ||
1.13 | mm | 100 | 10 | 400 | 1 | ||
1.14 | 1.0 | 2 | 0.5 | 3 | 0.1 | ||
1.15 | degree | 45 | -180 | 180 | 1 | ||
1.16 | mm | 140 | 10 | 200 | 1 | ||
1.17 | mm | 10 | 0 | 50 | 1 |
Log
Drawing
Export
Sub-designs (Number of sub-instances: 3)
-
12 parameters of myPartF with orientation [ 0.00, 0.00, 0.00 ] (degree) at position [ 0.00, 0.00, 0.00 ] (mm) Num Name Value Init Set? 1 L1 900 200 Yes 2 H1 560 100 Yes 3 H2 300 60 Yes 4 L2 300 60 Yes 5 L3 300 40 Yes 6 R1 10 10 Yes 7 R2 10 10 Yes 8 R3 10 10 Yes 9 R4 10 10 Yes 10 CS 0 0 Yes 11 R5 10 10 Yes 12 extrudLength 50 50 -
6 parameters of myPartG with orientation [ 0.00, 0.00, 0.00 ] (degree) at position [ 0.00, 0.00, 0.00 ] (mm) Num Name Value Init Set? 1 A 100 100 Yes 2 B 200 200 Yes 3 R 10 10 Yes 4 C 100 100 Yes 5 SF1 2 2 Yes 6 Z1 45 45 Yes -
3 parameters of myPartI with orientation [ 0.00, 0.00, 0.00 ] (degree) at position [ 0.00, 0.00, 0.00 ] (mm) Num Name Value Init Set? 1 A 166.66666666666666 30 Yes 2 B 140 20 Yes 3 R1 10 10 Yes