my Part-V
Parameters
# | Parameter name | Value | Unit | Default | Min | Max | Step |
1 | main | ||||||
1.1 | mm | 60 | 10 | 200 | 1 | ||
1.2 | mm | 40 | 10 | 200 | 1 | ||
1.3 | mm | 100 | 10 | 200 | 1 | ||
1.4 | mm | 80 | 10 | 200 | 1 | ||
1.5 | mm | 30 | -200 | 200 | 1 | ||
1.6 | mm | 30 | 10 | 200 | 1 | ||
1.7 | mm | 30 | 0 | 200 | 1 |
Log
Drawing
Export
Sub-designs (Number of sub-instances: 3)
-
3 parameters of myPartA with orientation [ 0.00, 0.00, 0.00 ] (degree) at position [ 0.00, 0.00, 0.00 ] (mm) Num Name Value Init Set? 1 D1 60 40 Yes 2 E1 10 3 Yes 3 L1 30 50 Yes -
3 parameters of myPartA with orientation [ 0.00, 0.00, 0.00 ] (degree) at position [ 0.00, 0.00, 0.00 ] (mm) Num Name Value Init Set? 1 D1 100 40 Yes 2 E1 10 3 Yes 3 L1 30 50 Yes -
5 parameters of myPartD with orientation [ 0.00, 0.00, 0.00 ] (degree) at position [ 0.00, 0.00, 0.00 ] (mm) Num Name Value Init Set? 1 D1 60 60 Yes 2 D2 40 40 Yes 3 D3 100 100 Yes 4 D4 80 80 Yes 5 H1 30 30 Yes