Welcome to Desi78-UI

Display the designs of desi78. Powered by the framework parametrix.

Cabane

[cabane]: La cabane des enfants

Parameters

Load Params from File

#	Parameter name	Value	Unit	Default	Min	Max	Step
1	main
1.1			mm	1600	100	4000	1
1.2			mm	2600	100	4000	1
1.3			mm	400	10	2000	10
1.4			mm	20	1	300	1
2	Face
2.1			mm	2000	100	4000	1
2.2			mm	0	-2000	2000	1
2.3			mm	1200	100	4000	1
2.4			mm	400	100	2000	1
2.5			mm	200	0	2000	1
2.6			mm	900	100	4000	1
2.7			mm	200	100	2000	1
2.8			mm	100	0	2000	1
3	Roof top
3.1			mm	500	0	2000	1
3.2			mm	300	0	2000	1
3.3			mm	400	0	2000	1
3.4			mm	200	0	2000	1
3.5			mm	300	0	2000	1
3.6			mm	100	0	2000	1
3.7			mm	300	0	500	1
4	Door
4.1			mm	-100	-2000	2000	1
4.2			mm	600	100	3000	1
4.3			mm	900	100	4000	1
4.4			mm	200	100	1000	1
4.5			mm	1500	100	4000	1
4.6			mm	300	100	1000	1
4.7			mm	700	100	4000	1
4.8			mm	200	100	1000	1
4.9			mm	200	0	500	1
5	Window
5.1			mm	700	0	3000	1
5.2			mm	700	10	3000	1
5.3			mm	100	-1000	1000	1
5.4			mm	500	10	1000	1
5.5			mm	700	10	1000	1
5.6			mm	-700	-3000	3000	1
5.7			mm	100	0	500	1

Comment:

Log

Geometry cabane computed at 8:58:54 PM
cabane simTime: 0
cabane-plancher-size: A: 1600.00 m, B: 2600.00 m, surface: 4160000.00 m2
Comparison with the golden-ratio: B/A: 1.63   100.43 %
roof angles: left: 33.69 degree, right: 47.73 degree
side-wall angles: left: 81.31 degree, right: 84.18 degree
roof: length-max: 3400.00 mm, back-max: 300.00 mm, front-max: 500.00 mm
[cabane_plancher]: cabane_plancher simTime: 0
[cabane_plancher]: cabane-plancher-size: A: 1600.00 mm, B: 2600.00 mm, surface: 4.16 m2
[cabane_plancher]: Comparison with the golden-ratio: B/A: 1.63   100.43 %
[cabane_plancher]: beam-bevel: W5b: 1.00 mm, H3b: 5.67 mm
[cabane_plancher]: buttress-length: 1119.53 mm
[cabane_plancher]: leg-length: 420.28 mm
[cabane_plancher]: cabane_plancher drawn successfully!
cabane drawn successfully!

Drawing

Export

Sub-designs (Number of sub-instances: 1)

thePlancher

19 parameters of cabane_plancher with orientation [ 0.00, 0.00, 0.00 ] (degree) at position [ 0.00, 0.00, 567.00 ] (mm)

Num	Name	Value	Init	Set?
1	N1	8	8	Yes
2	N2	13	13	Yes
3	W1	199.825	200	Yes
4	W2	199.8153846153846	200	Yes
5	Pilotis face	0	0
6	H1	400	400	Yes
7	H2	80	150	Yes
8	H3	80	150	Yes
9	W3	80	150	Yes
10	a1	80	80	Yes
11	W4	80	150	Yes
12	W5	79	135	Yes
13	E1	80	200	Yes
14	Pilotis side	0	0
15	T1	20	20	Yes
16	ES1	0.2	0.2	Yes
17	ES2	0.2	0.2	Yes
18	S1	160	200	Yes
19	S2	80	100	Yes

Cabane

Parameters

Log

Drawing faceTopfaceFaceFrontfaceFaceBackfaceFaceRooffaceFaceSidefaceSideAll faces merged

Export

Sub-designs (Number of sub-instances: 1)

Drawing